|
Product Categories
|
CR60NFZ-642-DDC1-906A NAG1-140kW-EURO6 OPS-ME04 01 1037547167 EDC17CP46 MB Sprinter 3.0CDI 140kW KTAG BOOT FULL.rarFULL IDENTIFICATION:
CR60NFZ-642-DDC1-906A
NAG1-140KW-EURO6
OPS-ME04
01
1037547167
EDC17CP46
MB
SPRINTER
3.0CDI
140KW
KTAG
BOOT
FULL
20 €
Technical Identification
Archive ContentsTotal size: 3,3 MB
Description
This software CR60NFZ-642-DDC1-906A NAG1-140kW-EURO6 OPS-ME04 01 1037547167 EDC17CP46 MB Sprinter 3.0CDI 140kW KTAG BOOT FULL is specially for the brand ECU - MB. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner. |
|
Product Categories
|
CR60NFZ-642-DDC1-906A NAG1-140kW-EURO6 OPS-ME04 01 1037547167 EDC17CP46 MB Sprinter 3.0CDI 140kW KTAG BOOT FULL.rar
FULL IDENTIFICATION:
CR60NFZ-642-DDC1-906A
NAG1-140KW-EURO6
OPS-ME04
01
1037547167
EDC17CP46
MB
SPRINTER
3.0CDI
140KW
KTAG
BOOT
FULL
20 €
Technical Identification
Archive ContentsTotal size: 3,3 MB
Description
This software CR60NFZ-642-DDC1-906A NAG1-140kW-EURO6 OPS-ME04 01 1037547167 EDC17CP46 MB Sprinter 3.0CDI 140kW KTAG BOOT FULL is specially for the brand ECU - MB. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner. |
FULL IDENTIFICATION:
| Brand | Mb |
| Model | A Sprinter |
| Engine | 3.0CDI |
| Power | NAG1-140KW-EURO6 |
| 140KW | |
| Ecu brand | BOSCH, OPS-ME04, EDC17CP46 |
| SW-BOSCH | 1037547167 |
| Programator | KTAG |
| Programing mode | BOOT |
| Type | FULL |
Total size: 3,3 MB
| File | Size |
|
SPRINTER 319 EGR,DPF,ADBLUE OFF.EPR Type: Eprom file |
64 KB |
|
SPRINTER 319 EGR,DPF,ADBLUE OFF.MPC Type: MPC internal flash |
4 MB |
|
SPRINTER 319 EGR,DPF,ADBLUE OFF Type: INTERNAL flash |
1,79 MB |
This software CR60NFZ-642-DDC1-906A NAG1-140kW-EURO6 OPS-ME04 01 1037547167 EDC17CP46 MB Sprinter 3.0CDI 140kW KTAG BOOT FULL is specially for the brand ECU - MB. It is used for competent and quick restoration of the functionality of this control unit, and also provides the ability to compare and configure the software to the needs of your client or car owner.
CR60NFZ-642-DDC1-906A
NAG1-140kW-EURO6
OPS-ME04 These numbers are intended for precise identification of the control unit and correct selection of software. This information is intended only for narrow specialists specializing in the field of repair of automotive electronics and is in no way a repair manual.